Beginners • Display stops after bootup: Pi 400 HDMI
Hi,My PI 400 boots up and I can see the output on the TV, but then it seems once the SD card loads, the display stops and there is NO SIGNAL on the TV. This is through HDMI and the cable that came...
View ArticleClik here to view.
Troubleshooting • NO CAMERAS AVAILABLE ; RPI5
While trying to access the camera connected on the csi port of RPI5 it says no cameras available Tried the same with changing the cable and also used another camera ; resulted in the same...
View ArticleTroubleshooting • External Drive issues with Pi5
I am currently experiencing issues trying to mount an external USB SSD to my Pi5 8GB to use as separate storage and not to boot from. I am unable to get the drive to show on the Pi at all. When using...
View ArticleTroubleshooting • Buster OS on 3B+ board boot problem.
Hi,everyone.Because some special use,I need to install Raspberry pi Buster OS on 3B+ board.I use imager utility to install the OS.I have installed the three following...
View ArticleGeneral • Interrupt constantly fires weirdly
I am using a Pico W with a rotary encoder that has a button on the knob. This is software debounced and configured as follows;Code: 'e_button' : Pin(21, mode=Pin.IN,...
View ArticleGeneral discussion • Problem with the WiFi on RPI4
Hey guys, this issue has been happening for some time already and I don't really get what's the reason.I always use a VNC server to have a better control over my Pi, and after some time after booting,...
View ArticleOff topic discussion • What happened to my old account
Can anyone explain why I was banned as a spambot please?My old account was miscbits and despite trying to contact the admin via the form I'm offered when trying to sign in I've not heard anything.I...
View ArticleTroubleshooting • Need help in integrating LoRa HAtT 1268 with Rpi 5
Soc address not found error when using Lora HAT directly with GPIO of Rpi 5 8gb Bookworm Os .Statistics: Posted by Sumeet019 — Sat Aug 03, 2024 3:53 pm — Replies 0 — Views 10
View ArticleClik here to view.
HATs and other add-ons • How to use waveshare display
So I have a problem so I’m working on a project wich I need that display for attached to my raspberry pi zero 2 w but I just can’t get the display to show anything…. I tried with a raspberry pi 5 and...
View ArticleHATs and other add-ons • PCIe M.2 HAT Debian 12
Servus Community,does Debian 12 (or Ubuntu) support a Pi5 with PCIe M.2 HAT? I don't necessarily need to boot from it but I would like to set up a backup volume for my web server with an NVME SSD that...
View ArticleRaspberry Pi Connect • Raspberry Pi connect with tailscale not streaming desktop
So I noticed that with the latest version of tailscale and raspberry pi connect on my raspberry pi 5 running bookworm when I click the screen sharing it connects but it presents me with a gray screen,...
View ArticleGeneral • RP2040: multiple (6) GPIO interrupts
Hi, I am trying to work out how to get multiple ISRs set up on 6 GPIO lines. I have six external signals and I need a separate response for each one. From what I have been able to ascertain, the STM...
View ArticleTroubleshooting • pi5 keeps locking up
My pi5 loaded up with pi os - latest, keeps locking upfrom what i have seen - when i have left open a ssh terminal, it looks like file access has stopped - I can ping but anything touching a file...
View ArticleTroubleshooting • Raspberry Pi 5 4g not booting
My Raspberry Pi 5 is not booting. When plugged in it shows the red LED as usual, but when I press the power button, there is a brief green flash, and then nothing. I have tried booting it with only...
View ArticleGaming • Wayfire desktop refuses to launch from "ports" in retropie...
I used to be able to launch a pixel desktop from the "ports" menu of retropi when I was running Buster.I tried to pull of the same functionality with the wayfire desktop after switching to Bookworm...
View ArticleBeginners • Is it safe to swap micro sd cards?
Hello!I have done a lot of work on an 8GB 4b, and rather than transferring the files, would it be possible to just take the sd card and put it in the 1GB 4b that I plan on actually running my project...
View ArticleMicroPython • Micorpython with Wiznet ethernet hat
Using MicroPython v1.23.0 on 2024-06-02; Raspberry Pi Pico with RP2040This is not the wireless enabled board - plain PICO.I have a Wiznet ethernet hat using the W5100S Embedded Internet ControllerThe...
View ArticleClik here to view.
Troubleshooting • Problem to store data throught Telegraf into InfluxDB
Hii've a problem to store data into InfluxDB throught Telegraf.I've a Raspberry Pi5 8GB and i've done this step:I've installed InfluxDB and Telegraf in my containerI've create an All Access Api Token...
View ArticleHATs and other add-ons • some projects for ai kit?
Hi,I just bought raspberry ai kit because I would like to try something in AI without having to spend a lot of money, I still have doubts about what it can actually do except object detection, face...
View ArticleGeneral discussion • long term use of Pi5 for surveillance on farmland
Hello Raspberry Pi community,I'm planning an experiment using Raspberry Pi 5s with camera modules to monitor bee hive activity in different types of farmland. The setup will involve monitoring 15 to...
View Article