Troubleshooting • Current Bookworm update... Resolutions missing
Installed current Bookworm updates only to find only 4 resolution setting available... previously 15 options were.Any ideasStatistics: Posted by FlashHarry57 — Thu Jul 04, 2024 3:17 am — Replies 0 —...
View ArticleHATs and other add-ons • Raspberry Pi 5 M.2 HAT+ longer FPC cable 5cm
HelloI have tried searching and chasing down threads on the PCIE FPC cable but unable to find a link to a longer alternate option, so seeking some a help here.I have recently purchased the RPI5 along...
View ArticleGeneral • Getting Started with Raspberry Pi Pico W
Hi, I'm just getting started with Pico W to integrate a couple of sensors and actuators generally in Arduino I was able to import each sensor's library and then use the functions present in them but...
View ArticleGeneral discussion • Raspberry PI industry integrators forum?
Hi there, I'm an experienced software developer looking to create a product based on Raspberry Pi.I'm aware of https://www.raspberrypi.com/for-industry/ but I don't see a forum or am I expected to...
View ArticleTroubleshooting • rtlsdr: Failed to enable unit:...
I'm trying to use an SDR dongle attached to a Pi3 as an RTL TCP server. I've followed this https://github.com/c4software/raspberry-rtlsdr-serverBut as this doesn't quite work as-is I've also followed...
View ArticleOfficial Display • Inverted Screen for Raspberry Pi 2 Model B (Rev 1.1) with...
Hello, everyone.I am having a problem with my Raspberry Pi 2 Model B Rev 1.1 and the official display. I've been using this arrangement without issue for a while, however after installing Raspberry Pi...
View ArticleBeginners • The Pi5, new HAT - how to dd image from SD-card
Hi.. I have just ordered the new Raspberry Pi M.2 HAT and SSD disk.. Today I am booting from a SD-card, using the Pi5 as a server (ZFS fileserver) and also installed Netdata, by compiling the Netdata...
View ArticleRaspberry Pi OS • Disabling Pop-up Windows
Hello! I'm wondering if it's possible to disable pop up windows that can only be closed by manually pressing "ok" button. More specifically I want to close/disable a window that appears when you...
View ArticleAdvanced users • I need help with the ip route on my server - RPi4
I want to set my eth0 as the default IP route but when I do so it reverts back to wlan0I have the metric for eth0 set to 100 and wlan0 set to 500 in the /etc/dhcpcd.conf so it could make eth0 more...
View ArticleTroubleshooting • Freezing under load with Raspberry Pi 4B 1gb, me or the pi?
Problem hardware: A Raspberry Pi 4b 1gb Operating systems tried: A Raspberry Pi OS 64-bit (bookworm) Raspberry Pi OS 32-bit (bookworm) Raspberry Pi OS 32-bit legacy (bullseye)I recently got a...
View ArticleGeneral discussion • Flash the eMMC
I have a Compute Module 4 IO Board.I want to write a Raspberry Pi OS image to Compute Module, using Raspberry Pi Imager, it took 30 minutes to complete the burning, because it took too long, so I use...
View ArticleBeginners • L298N Motor Driver and a 5v conundrum
Creating a robot using a Raspberry pi 4B. The robot is using a L298N Motor Driver, a Husky lens and a DF2301Q Voice recognition module.My problem is that the Husky lens and the VR Module are connected...
View ArticleGeneral discussion • Powering multiple RPi with 300W PSU
Hello,I'm thinking of powering two raspberry pi 5 boards, both with nvme ssd storage and a raspberry pi 4 that has all kinds of peripherals (I get undervolt warnings on it when it's booting up with...
View ArticleGeneral discussion • Raspberry Pi 5 - Wifi not working after nvme boot
I previously booted the raspberry pi 5 using SD Card.i recently upgrade my boot drive to nvme. I use geekworm X002 NVME hat and Lexar M.2 Nvme.I noticed my wifi not working after few minutes boot from...
View ArticleGeneral discussion • Full disk encryption (large NVME-drive)
What would be the easiest way to fully encrypt a larger NVME-drive (1TB+) with LUKS? I have successfully used https://github.com/gitbls/sdm/blob/mast ... ryption.md to encrypt my 128 GB SD-card, but...
View ArticleBeginners • Unable to flash and use PICO on Mac
Hi all,I just got a Waveshare RP2040-zero and I'm unable to use it with Macos Sonoma 14.5.I've read all the tuttorials on how to, including holding the "bootsel" button, using Arduino IDE, installing...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • CM4 UART issues when migrated from...
Hi,I used CM4 UART (GPIO4 = TXD3, GPIO5 = RXD3) with Bullseye. It worked well. Now migrated my image to Bookworm and can read/write to/from that UART.I see all UARTs activated: with Bullseye I used...
View ArticleOff topic discussion • Porting Windows mobile to modern Android devices
Most of the people love how the Windows mobile os looks. The major complain is the app support which is also the major reason of its extinction.So I was wondering if its possible to port Windows...
View ArticlePython • Wait for app to open with Python
Hi, I have a python script that I'm trying to have wait until Audacity is open. But I've had no such luck with finding something that works. Does anyone know how to make my script wait until Audacity...
View ArticleRaspberry Pi Connect • RPI connect won't start on model 3B
Like others, I cannot get rpi connect to start and I have read the posts.uname -aLinux raspberrypi 6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux$ cat...
View Article