MicroPython • VSCode stopped working on multiple computers for MicroPy
I have been using VSCode and Thonny on three different MAC computers. All going along well until yesterday. Programming in mice-python in the morning, all fine. In the evening all three MACs with...
View ArticleGeneral • Routing USB connector through PCB
I am currently designing a PCB board that will connect to the pins on the raspberry Pi Pico and I was wondering if there is a way that I can reroute the usb connector on the board to the PCB board....
View ArticleTroubleshooting • Boot from usb, rpi image installer shows up
Until now I had a ssd and I was booting with it, now with a usb hub I have connected 2 more disks.Sometimes works right, sometimes the rpi imager installer shows up.I have tried booting from an sd...
View ArticleMicroPython • Sleep mode?
Is there any way I could put my device to sleep until there is an interrupt ?or a fixed timing of sleep for 5mins collect data for a minute and then sleep ?thanks.Statistics: Posted by Ab25 — Thu Aug...
View ArticleTroubleshooting • Unable to Create SD Card with OS
I just bought my raspberry pi 5 and bought a brand new samsung 512gb micro sd card. I downloaded the newest version of the pi image installer from this website. Told it to write to the microsd card...
View ArticleTroubleshooting • Slow speeds on all OS’s
Hello I have a Pi4 here with 8G? (Lost the box) anyway, I had the Pi running good then a few months ago started running very poorly such as unusual config files and low low speeds such as 16G transfer...
View ArticleRaspberry Pi OS • Why isn't the kernel updated more often?
The latest kernel is from 2024-05-29 according to uname. Isn't it a long time considering that there are lots of security updates?Statistics: Posted by rbranco — Thu Aug 29, 2024 9:36 pm — Replies 0 —...
View ArticlePython • Cron job for discord.py python script
I am attempting to run a discord.py bot with a cronjob however after correcting a programming error which would have made this impossible, I am still unable to run the cronjob. I have been using...
View ArticleBeginners • Which nvme hat to use with Official Case with cover on?
Hi all, the Which nvme hat can i use with official case with active cooler, can i shut the top cover with official nvme hat?Thanks.Statistics: Posted by vvti9 — Fri Aug 30, 2024 4:11 pm — Replies 1 —...
View ArticleAdvanced users • How to downgrade bookworm kernel from 6.6 to 6.1?
I need to go down to kernel 6.1 in order to be able to install the kernel module required by a Moxa USB to RS485 adapter. The module provided by Moxa warns on installation with Code:...
View ArticleSDK • VSCode debug probe 30 second delay every time
Hi, I am new to this.Using VSCode set up as per the SDK getting started guide, with a Raspberry Pi Debug Probe. It seems that every time I choose to run/debug, there's a 30 second delay before, I...
View ArticleRaspberry Pi 400 • Pi400 shutdown woes
A bit of context:I recently modified my pi400 by disconnecting the d+ and d- that connect the on-board keyboard to the usb processor IC. I then connected those pins from the usb processor to the usb...
View ArticleGeneral • Apparent issue found with Always-On Timer on the RP2350
I am the primary developer of zeptoforth, a Forth implementation that supports the RP2040 amongst other things, and which is in alpha for the RP2350 (https://github.com/tabemann/zeptoforth/ ......
View ArticleGeneral discussion • Pi 5 active cooler not running continuously
Does anyone know why my raspberry pi 5 active cooler isn't running all the time as I have to enter a command to start the fan then when ever I reboot or shutdown the fan won't spin again until the...
View ArticleRaspberry Pi 400 • How to Provide Power from Desktop Power Supply
I am not sure this is the correct group, but I couldn't find a hardware group specific to the Zero 2 W. I have a Raspberry Pi Zero 2 W. The first USB connector only supplies power. I can see that on...
View ArticleBeginners • Capturing live video from UVC webcam and sending it to HDMI?
Hello.I have the following task:I have high quality FullHD webcam, which supports UVC protocol, so it is "driver-less".I want to connect it to Raspberry and get it's output at full resolution at HDMI...
View ArticleGeneral • Unable to see the output of I2C example program
I am trying to run the following example program that is located in the pico examples githubCode: /* * Copyright (c) 2021 Valentin Milea <valentin.milea@gmail.com> * Copyright (c) 2023 Raspberry...
View ArticleClik here to view.
Troubleshooting • Flashing EMMC on CM4 taking this much memory?
Hi Guys,I just got a Compute module 4 linked here: https://www.pishop.us/product/raspberry ... cm4004008/I flashed the EMMC and when I boot up the CM4 and run the command "df -h", 75% of my...
View ArticleGeneral • Pico2 (RP2350 B) running beyond 600 MHz, from flash, with PSRAM, in...
It's my first time getting hands on the new RP2350B (Pimoroni Pico Plus 2), so what if ...And here we are, based on previous experience with RP2040, trying to squeeze it to the limits, without killing...
View ArticleClik here to view.
Compute Module • The ethernet PHY is not working on my CM4 base board
Hey,Here is my design for the ethernet port for CM4. I do not know why it is not working and cannot find the issue. does anyone know what is the problem with this schematic?Statistics: Posted by...
View Article