I have a few raspberry pi 5's which are powered using some POE hat and are powered via a cisco switch. I have installed the default debian image that has NetworkManager as the default networking manager. It has connected to the wifi just fine however I want a secondary wired network using the eth0. I am unable to make it active
Any idea how to make this work?
Code:
nmcli d sDEVICE TYPE STATE CONNECTIONwlan0 wifi connected preconfiguredlo loopback connected (externally) lop2p-dev-wlan0 wifi-p2p disconnected --eth0 ethernet unmanaged --Code:
nmcli c sNAME UUID TYPE DEVICEpreconfigured 24bc510b-3483-479c-bfce-7c28bf217ad0 wifi wlan0lo 16c48336-8337-4661-9264-8acddf780617 loopback loWired connection 1 0ae94c14-e6fe-44fe-8450-404e84c5f8e5 ethernet --Code:
ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 2c:cf:67:d8:c7:7d brd ff:ff:ff:ff:ff:ff3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 2c:cf:67:d8:c7:7e brd ff:ff:ff:ff:ff:ff inet 10.0.125.158/24 brd 10.0.125.255 scope global dynamic noprefixroute wlan0 valid_lft 85773sec preferred_lft 85773sec inet6 fe80::e7e5:ad2d:4343:e42c/64 scope link noprefixroute valid_lft forever preferred_lft foreverStatistics: Posted by zozotk — Sat Mar 08, 2025 11:07 am — Replies 0 — Views 31
