Attempting to load Pi OS 64-bit on CM5 loaded on official Raspberry Pi Compute Module 5 IO Board.
sudo ./reboot -d mass-storage-gadget64 runs with success.
Results in this message on the serial terminal:
Raspberry Pi 64-bit Mass Storage Gadget
rpimsg login: root (sutomatic login)
#
Raspberry Pi Imager is pointing to: mmcblk0 Raspberry Pi multi-function USB device - 31.3 GB
Throws this error when attempting to use Raspberry Pi Imager v1.7.2 to load Pi OS 64-bit.
Write error while trying to zero out last part of card.
Card could b advertising wrong capacity (possible counterfeit).
The CM5 will boot from microSD card.
My thoughts are that the eMMC is corrupted. Is there a process to reset the eMMC to factory default? Is that any documentation that may help me solve this problem? I've tried fdisk with no joy.
Thank you.
sudo ./reboot -d mass-storage-gadget64 runs with success.
Results in this message on the serial terminal:
Raspberry Pi 64-bit Mass Storage Gadget
rpimsg login: root (sutomatic login)
#
Raspberry Pi Imager is pointing to: mmcblk0 Raspberry Pi multi-function USB device - 31.3 GB
Throws this error when attempting to use Raspberry Pi Imager v1.7.2 to load Pi OS 64-bit.
Write error while trying to zero out last part of card.
Card could b advertising wrong capacity (possible counterfeit).
The CM5 will boot from microSD card.
My thoughts are that the eMMC is corrupted. Is there a process to reset the eMMC to factory default? Is that any documentation that may help me solve this problem? I've tried fdisk with no joy.
Thank you.
Statistics: Posted by fredeady — Wed Jan 15, 2025 5:15 pm — Replies 0 — Views 24