1.When uploading the program, the log indicates that the UF2 file was successfully written to the Raspberry Pi Pico, but the device fails to run the program.
2.After using nuke.uf2 to erase the Flash memory, the Pico remains in boot mode and cannot execute user programs.
3.Replacing the USB data cable did not resolve the issue.
4.The generated UF2 file size and log seem normal, but the program (e.g., the Blink example) does not work as expected.
5.Is it possible that there is hardware damage, such as a faulty Flash memory or USB module?
6.Issues might arise in sections of the program involving peripherals (e.g., I2C, SPI, or GPIO control).
If you need further details or logs for troubleshooting, please let me know!
2.After using nuke.uf2 to erase the Flash memory, the Pico remains in boot mode and cannot execute user programs.
3.Replacing the USB data cable did not resolve the issue.
4.The generated UF2 file size and log seem normal, but the program (e.g., the Blink example) does not work as expected.
5.Is it possible that there is hardware damage, such as a faulty Flash memory or USB module?
6.Issues might arise in sections of the program involving peripherals (e.g., I2C, SPI, or GPIO control).
If you need further details or logs for troubleshooting, please let me know!
Statistics: Posted by Adrian985 — Sun Jan 12, 2025 4:00 pm — Replies 1 — Views 19