Hello, this is my first time doing anything with Raspberry Pi and I want to make sure I got everything right before I get started. I appreciate any guidance or tips.
I want to build a simple DIY camera. I did some research and watched some tutorials, and I've gathered this list of components:
1.Raspberry Pi Zero W
2.Camera Module 3
3.22-pin Camera Cable (Pi Zero compatible)
4.LED RGB for feedback
5.SD Card
6.Button
7.PiSugar S 1200mAh battery
8.3D Printed Case
I want the camera to be portable so I can take pictures wherever I want. The plan is to use the button for taking photos and power on/off, and the LED for photo confirmation and status indicators.
Will the PiSugar S work well for making it portable?
Am I missing anything important?
Any tips or suggestions would be greatly appreciated
I want to build a simple DIY camera. I did some research and watched some tutorials, and I've gathered this list of components:
1.Raspberry Pi Zero W
2.Camera Module 3
3.22-pin Camera Cable (Pi Zero compatible)
4.LED RGB for feedback
5.SD Card
6.Button
7.PiSugar S 1200mAh battery
8.3D Printed Case
I want the camera to be portable so I can take pictures wherever I want. The plan is to use the button for taking photos and power on/off, and the LED for photo confirmation and status indicators.
Will the PiSugar S work well for making it portable?
Am I missing anything important?
Any tips or suggestions would be greatly appreciated
Statistics: Posted by Camcam3620 — Sat Sep 20, 2025 5:06 pm — Replies 0 — Views 54