Hi everyone,
I am using the IMX585 camera module on a Raspberry Pi 5.
ClearHDR is enabled. (Low Gain and High Gain images are combined at the sensor side)
As it stands now, we were able to take a still image,
but we are experiencing a problem with one part of the image turning pink.
The shooting commands are as follows：
libcamera-still --raw -o image.dng --mode 1920![:1080:]()
12:U
The dng image obtained by executing this command is developed by RawTherapee.
It appears that a certain luminance range is pink, not the entire image.
This is especially clear in the bottom row of the color checker.
I don't know what causes the pink color and how to fix it.I suspect that the cause is not on the sensor side but on the CFE (Camera Front End) or ISP.
Please let me know if you have any information on what could be the cause of the pink color.
【Environment】
Model: Raspberry Pi 5
OS: Debian GNU/Linux 12 (bookworm)
Kernel: 6.6.47-v8-16k+
I am using the IMX585 camera module on a Raspberry Pi 5.
ClearHDR is enabled. (Low Gain and High Gain images are combined at the sensor side)
As it stands now, we were able to take a still image,
but we are experiencing a problem with one part of the image turning pink.
The shooting commands are as follows：
libcamera-still --raw -o image.dng --mode 1920
12:UThe dng image obtained by executing this command is developed by RawTherapee.
It appears that a certain luminance range is pink, not the entire image.
This is especially clear in the bottom row of the color checker.
I don't know what causes the pink color and how to fix it.
Please let me know if you have any information on what could be the cause of the pink color.
【Environment】
Model: Raspberry Pi 5
OS: Debian GNU/Linux 12 (bookworm)
Kernel: 6.6.47-v8-16k+
Statistics: Posted by Uchimura — Tue Jun 03, 2025 6:03 am — Replies 1 — Views 24