Hi,
Apologies if this has been asked before.
I'm trying to boot a Raspberry Pi OS installation from a USB flash drive using a Compute Module 5 (CM5) on a CM4 IO board.
On power-up, the HDMI output shows activity, and it appears to attempt booting from mass storage (MSD), but the USB flash drive never powers up. Additionally, connecting a keyboard and mouse to the IO board shows no signs of activity.
The same setup works as expected when a CM4 is used.
Any help would be greatly appreciated.
Apologies if this has been asked before.
I'm trying to boot a Raspberry Pi OS installation from a USB flash drive using a Compute Module 5 (CM5) on a CM4 IO board.
On power-up, the HDMI output shows activity, and it appears to attempt booting from mass storage (MSD), but the USB flash drive never powers up. Additionally, connecting a keyboard and mouse to the IO board shows no signs of activity.
The same setup works as expected when a CM4 is used.
Any help would be greatly appreciated.
Statistics: Posted by shaun2048 — Sat Feb 15, 2025 2:57 pm — Replies 1 — Views 38