Weather station • Hardware... and weather station questions

Hi all

A local Rpi Distributor has the normal/standard Weather station kit,

Which comes with the 3 units, speed, direction and rain, each with a RG11 connection, "dumb" question, are these digital or analog devices, should I consider a little bread board with a MCP2008 also...

If I look at their items for sale, they have a HAT, but it only caters for 2 x RG11...

So, what does everyone do, cut wires and soldier directly onto Rpi... thinking RPi 4B 1GB ? would that be enough. With a PoE HAT.

considering I probably want to mount this some distance above the roof... assume a BME280 is not a bad idea, but where to mount it.

If I attach a box onto the pole for the Rpi.... I'm not exactly keen on drilling hole in it for anything other than the single cat5e cable.

I'm guessing a bme280 temp measured in a box like this out on a pole might also be off...
temp and hum would be spot on...

Is there a reason that the entire weather station section seems to be locked...

Does WeatherUnderground still take applications ?

G

Statistics: Posted by georgelza — Sun Dec 29, 2024 2:50 pm — Replies 1 — Views 20

---