Hi!
I have a PI5 + NVME SSD
I tried to auto mount a USB stick (1 To).
I modified FSTAB, then on the next reboot, the PI 5 was bricked. Impossible to login (local console), the PI was not on the network.
I had to boot on a MicroSD to mount the SSD, then to edit and comment the wrong line in FSTAB.
Now my PI 5 is booting normally.
The line was :
UUID=896225ed-4c8c-4e93-842a-8b6fc03a43d7 /mnt/usb-drive ext4 defaults,noatime,gid=Jey 0 0
Do you know why it bricked the PI ?
The message on the screen was :
Do you know what I should use to auto mount this USB stick? (I want to use it to backup the pi, with Raspi-Backup).
Thank you![:)]( "Smile")
I have a PI5 + NVME SSD
I tried to auto mount a USB stick (1 To).
I modified FSTAB, then on the next reboot, the PI 5 was bricked. Impossible to login (local console), the PI was not on the network.
I had to boot on a MicroSD to mount the SSD, then to edit and comment the wrong line in FSTAB.
Now my PI 5 is booting normally.
The line was :
UUID=896225ed-4c8c-4e93-842a-8b6fc03a43d7 /mnt/usb-drive ext4 defaults,noatime,gid=Jey 0 0
Do you know why it bricked the PI ?
The message on the screen was :
Reloading system manager configuration.
Starting default.target
you are inemergency mode. After logging in, blabla logs.
Cannont open access to console, the root account is locked.
Do you know what I should use to auto mount this USB stick? (I want to use it to backup the pi, with Raspi-Backup).
Thank you
Statistics: Posted by JeyC — Sun Dec 29, 2024 12:34 pm — Replies 2 — Views 64