Gents, could you help me with an issue?
I have a CM5 DevKit, and I initially installed the OS into the eMMC properly. However, after a few missteps, I realized that the OS is not working correctly (it fails to load in GUI mode). So, I decided to install a fresh OS, but I am unable to do so.
When I fit the nRPI_BOOT jumper, the board starts (red light on, black screen, and Windows detects a USB device "BCM2712D0 Boot"), but Raspberry Pi Imager sees nothing (no storage), so I cannot reinstall the OS.
I also tried connecting a USB flash drive with the new OS, but the result is the same.
Could you please advise on what to do?
I have a CM5 DevKit, and I initially installed the OS into the eMMC properly. However, after a few missteps, I realized that the OS is not working correctly (it fails to load in GUI mode). So, I decided to install a fresh OS, but I am unable to do so.
When I fit the nRPI_BOOT jumper, the board starts (red light on, black screen, and Windows detects a USB device "BCM2712D0 Boot"), but Raspberry Pi Imager sees nothing (no storage), so I cannot reinstall the OS.
I also tried connecting a USB flash drive with the new OS, but the result is the same.
Could you please advise on what to do?
Statistics: Posted by xasm — Mon Dec 09, 2024 9:01 am — Replies 3 — Views 40