Using iperf3 this is what I get from the pi to a windows server. Is this good, average or bad. I've tried to find a reference page but failed.
Code:
mrg9999@RPI5-4:~ $ iperf3 -c 192.168.0.200Connecting to host 192.168.0.200, port 5201[ 5] local 192.168.0.62 port 53228 connected to 192.168.0.200 port 5201[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-1.00 sec 12.4 MBytes 104 Mbits/sec 0 200 KBytes[ 5] 1.00-2.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes[ 5] 2.00-3.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes[ 5] 3.00-4.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes[ 5] 4.00-5.00 sec 11.6 MBytes 97.1 Mbits/sec 0 200 KBytes[ 5] 5.00-6.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes[ 5] 6.00-7.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes[ 5] 7.00-8.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes[ 5] 8.00-9.00 sec 11.6 MBytes 97.1 Mbits/sec 0 200 KBytes[ 5] 9.00-10.00 sec 11.2 MBytes 93.5 Mbits/sec 0 200 KBytes- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-10.00 sec 114 MBytes 95.3 Mbits/sec 0 sender[ 5] 0.00-10.01 sec 113 MBytes 94.4 Mbits/sec receiverStatistics: Posted by mrg9999 — Fri Nov 01, 2024 2:21 am — Replies 1 — Views 28