I recently dug out a Pi Zero and a 3b and updated the OS. The 3b is fine but the Zero (in addition to being very, very slow) won't connect to WiFi.
I used the same settings for WLAN in Imager as for the 3b and they subsequently appear correctly in the settings for the "preconfigured" connection.
I tried setting up a new wireless connection but having done so I could find no way of selecting it and it wasn't selected on reboot.
I suspect it's not worth spending time on this, perhaps 512MB isn't viable, but I'd like to know if there is something simple I might be missing.
I used the same settings for WLAN in Imager as for the 3b and they subsequently appear correctly in the settings for the "preconfigured" connection.
I tried setting up a new wireless connection but having done so I could find no way of selecting it and it wasn't selected on reboot.
I suspect it's not worth spending time on this, perhaps 512MB isn't viable, but I'd like to know if there is something simple I might be missing.
Statistics: Posted by invictusbob — Thu Oct 17, 2024 6:08 pm — Replies 0 — Views 2