Hi everybody
I have a little trouble with a Raspberry Pi 3 Model B Plus Rev 1.3, 4 cores, with 3 harddisk (1 classical, 2 ssd in mirror) on a powered usb hub and raspbian64.
It's a good one, nicely deserving some development web site (apache2, php) and plexmediaserver for fun.
But... since a few months, it's going a little crazy by stopping randomly without any reason (must be some but I can't find !)
When it goes down, I can ping but this is the only thing I can do. Ssh is not working, nor web access (or webmin). When I go to the server, keyboard is not working (can't key anything) but... Ctrl+F2 is working. I can switch beetween session but still can't key anything.
After switching it off/on, everything is back for an undefined time...
So I checked journalct, nothing. I checked logs, nothing.
I though it could be the power so I changed it, nothing better.
I checked temperature, nothing strange.
I changed HD for SSD, nothing.
I removed plex, nothing better.(I changed it for jellyfin, nothing better.)
I stopped jellyfin and monitored through Htop, nothing. The screen was stuck, but I have seen that memory was ok, swap also, and proc were not really working (10% or less for 2 of them)
I changed for a new sdcard(though it was not good anymore) and rebuild from scratch, still have the problem. So I guess that there is some badworking or bad config somewhere.
What can I do to catch a clue somewhere ?!!! Any ideas are welcome![:D]( "Very Happy")
I have a little trouble with a Raspberry Pi 3 Model B Plus Rev 1.3, 4 cores, with 3 harddisk (1 classical, 2 ssd in mirror) on a powered usb hub and raspbian64.
It's a good one, nicely deserving some development web site (apache2, php) and plexmediaserver for fun.
But... since a few months, it's going a little crazy by stopping randomly without any reason (must be some but I can't find !)
When it goes down, I can ping but this is the only thing I can do. Ssh is not working, nor web access (or webmin). When I go to the server, keyboard is not working (can't key anything) but... Ctrl+F2 is working. I can switch beetween session but still can't key anything.
After switching it off/on, everything is back for an undefined time...
So I checked journalct, nothing. I checked logs, nothing.
I though it could be the power so I changed it, nothing better.
I checked temperature, nothing strange.
I changed HD for SSD, nothing.
I removed plex, nothing better.(I changed it for jellyfin, nothing better.)
I stopped jellyfin and monitored through Htop, nothing. The screen was stuck, but I have seen that memory was ok, swap also, and proc were not really working (10% or less for 2 of them)
I changed for a new sdcard(though it was not good anymore) and rebuild from scratch, still have the problem. So I guess that there is some badworking or bad config somewhere.
What can I do to catch a clue somewhere ?!!! Any ideas are welcome
Statistics: Posted by fiji — Mon Aug 26, 2024 5:20 pm — Replies 0 — Views 13