General discussion • INNOLUX AT070TN94 7inch display with raspberrypi 3b+ :: the image on display is not showing properly

Hi everyone,
I am using INNOLUX AT070TN94 7inch DPI display with raspberrypi 3b+. After setting its config.txt file, I am getting something like attached image on it's display.

config.txt file setting for display is like below:
framebuffer_width=800
framebuffer_height=480

dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dpi-generic

dtparam=rgb888,clock-frequency=33264000
dtparam=hactive=800,hfp=210,hsync=2,hbp=44
dtparam=vactive=480,vfp=22,vsync=2,vbp=23
dtparam=hsync-invert,vsync-invert

kindly tell me, where am i doing wrong configuration?


data sheet link::
https://cdn-shop.adafruit.com/datasheets/AT070TN94.pdf

Statistics: Posted by manual — Thu Feb 01, 2024 9:16 am — Replies 0 — Views 45

---