Hi, new to the forum (and actually just electronics in general)
I've got a Digiamp+ hooked up to a Raspberry Pi Zero, and I've installed Shairport on it following this guide: https://howtohifi.com/how-to-create-an- ... pberry-pi/
I then set it to automatically start: https://howtohifi.com/how-to-automatica ... port-sync/
The problem I'm having is that the green mute LED is on and won't turn off, regardless of whether I adjust the volume. The device shows up under Airplay as it should do, and music plays on my Mac/phone, but the mute switch just won't turn off.
I found this, which I thought might solve it, but I'm not 100% sure where I'm supposed to input it... do I do this in Terminal too? https://www.raspberrypi.com/documentati ... audio.html
dtoverlay=rpi-digiampplus,unmute_amp
If anyone might be able to help that would be great, appreciate your time
I've got a Digiamp+ hooked up to a Raspberry Pi Zero, and I've installed Shairport on it following this guide: https://howtohifi.com/how-to-create-an- ... pberry-pi/
I then set it to automatically start: https://howtohifi.com/how-to-automatica ... port-sync/
The problem I'm having is that the green mute LED is on and won't turn off, regardless of whether I adjust the volume. The device shows up under Airplay as it should do, and music plays on my Mac/phone, but the mute switch just won't turn off.
I found this, which I thought might solve it, but I'm not 100% sure where I'm supposed to input it... do I do this in Terminal too? https://www.raspberrypi.com/documentati ... audio.html
dtoverlay=rpi-digiampplus,unmute_amp
If anyone might be able to help that would be great, appreciate your time
Statistics: Posted by Lapprenti — Sun Jun 09, 2024 7:10 pm — Replies 0 — Views 20